How to Get Purple Shampoo Out of Carpet | Most Simple Guide

As an Amazon Associate I earn from qualifying purchases.

Purple shampoo dye is one of the most disturbing stains and it’s tough to remove that shampoo from the carpet. You can’t even waste seconds in this case because the longer it sits on your carpet, the harder it is to clean. And since it’s the carpet, you can’t use harsh chemicals to take it off as much as you may want.

So how to deal with this unpleasant and uncompromising situation? Not to worry. While it is difficult to get the shampoo out of the carpet and take care of the stains, it’s not impossible. With the right ingredients, technique, and timing, you can remove those purple stains from the carpet once and for all.


Techniques of getting Purple Shampoo Out of Carpet

Removing shampoo out of the carpet and taking off stains requires mild cleaning solutions and a delicate job. You don’t want to use strong chemicals that can damage the carpet fabric even if they effectively remove the spots. You need to be careful, and apply the right amount of suitable components to be successful.

Before you start, gather a few things.

  • White vinegar
  • Warm water
  • DishWashing soap
  • Rubbing alcohol
  • Sponge
  • A bowl
  • Paper towels
  • Dry cloths

Step 01: When you are going to clean shampoo and stains out of the carpet, always do this step first. Act as soon as you’ve seen the spill, take paper towels, and place those over the affected area. Take off the shampoo as much as you can before it sticks to the carpet. You can use dry cloths as well, just be sure to wipe off the possible amount of spills before you move on to the next step.

Step 02: Create a mild yet effective cleaning solution with two cups of warm water, one tablespoon of dish soap, and one tablespoon of white vinegar. Mix these into a bowl, you should get a watery solution that will do the trick.

Step 03: Take a clean cloth and dip it into your bowl, but don’t dampen too much so that it doesn’t drip. Then press the cloth onto the stained area of the carpet. Don’t rub, just gently press it to apply the cleaner deeper into the carpet.



Step 04: Once you have applied your cleaning solution, it will start to loosen up stains from the carpet fabric, effectively making it possible to remove. Take a dry cloth and start to blot the damp area carefully. You can use paper towels as well in this case. The purple stains should come off with the cloth as you apply.

Repeat the process of pressing the cleaning mixture cloth and blotting with dry cloths afterward to remove the stains completely.

Step 05: Once you have managed to take off those stains, soak a sponge with clean water, and damp the carpet area. Wet the carpet fairly and use dry cloths or paper towels to blot the carpet dry. This step is to take off the remaining cleaning mixture and residue from the carpet.

Step 06: As we’ve said earlier, purple shampoo stains can be very difficult to remove. If you come to realize that some of the stains are still there, don’t sweat. Rubbing alcohol is a magic stain remover and it doesn’t necessarily damage the carpet.

So if required, damp clean cloth with rubbing alcohol and press it gently against the remaining stain. Then similarly like before, use dry cloths to blot the area carefully. Repeat this process, and you won’t have to worry about the stains afterward. Finally, let it dry completely.

Bonus tip: Using too many watery mixtures on the carpet can make it damp and dull. Consider taking care of that flattened situation and fluff up your carpet to get it back to its original state.

Take Care of Stubborn Stains with Ammonia

If the above techniques don’t work, the shampoo may have been on the carpet a long time and you probably have a more stubborn stain than you thought. But not to worry, we’re not leaving you stranded. Ammonia is a strong cleaning agent that can take care of any spots. But since it’s corrosive, we only recommend using it on the carpet for the toughest stains.



Step 01: Ammonia is both toxic, corrosive, and can cause potential irritation to the skin. So before you start, wear gloves, open your windows and doors for clear ventilation.

When you’re ready, create a mixture like before, but add ammonia instead of vinegar. Take two cups of warm water, 1 tablespoon of ammonia, and 1 tablespoon of dishwashing liquid into a bowl and create your solution.

Step 02: Damp a clean cloth with the cleaning agent and press it gently onto the stained area of the carpet. Once you’ve covered it whole, leave it to work for around 30 minutes.

Step 03: After 30 minutes, use a damp sponge to dab the area with clean water. The shampoo stains should come off with the application. If some remains, apply the ammonia solution like before and leave it for 5 minutes before cleaning it.

Damp the area thoroughly with water using a sponge or clean cloths. Then use dry cloths to blot the surface and let it dry completely.

Read next: How to clean carpet yourself

Frequently Asked Questions (FAQ)

How do you get purple shampoo stains out?

Use a mixture of water, 1 tablespoon of vinegar, and 1 tablespoon of dish soap to damp cloth. Press it gently against the stained area to apply the solution. Then soak a towel or cloth with clean water and dab water onto the carpet. Finally, use dry cloths to blot the water and cleaner residue.

What is the fastest way to get stains out of the carpet?

Act as quickly as possible to get stains out of the carpet fast. Mix ¼ cup ammonia and ¼ cup dishwashing liquid with water and apply on the stains with a clean rag. Then wet the area with water and soak it up with dry towels.

How do you remove set-in stains from carpet?

Spray a solution of ¼ cup vinegar, dish soap, and 2 cups of water on the stains. Leave for a few minutes, then take it off using a steam cleaner or dry towels.

How does vinegar remove dye from the carpet?

Vinegar, combining with dishwashing liquid and warm water, can remove dye and stains from the carpet. Simply apply the solution with a clean cloth, wet and dry the area afterward.

Will hydrogen peroxide take the color out of the carpet?

Hydrogen peroxide is a strong stain remover but it has the potential to discolor carpets upon use. You can still use it to remove the most stubborn stains, but consider the risks, and test it on an inconspicuous area of the carpet first.

Wrapping Up

It’s important to act as quickly as possible to remove shampoo out of the carpet and tackle the stains once spotted. Choose your ingredients carefully and follow our detailed guide to take care of purple shampoo stains, and keep your carpet new at the same time.

As an Amazon Associate I earn from qualifying purchases.

We will be happy to hear your thoughts

Leave a reply