How to Clean a Toilet Brush | 3 Simple Techniques

Cleaning Insider May 25, 2022 2552 7

SaveSavedRemoved 1

As an Amazon Associate I earn from qualifying purchases.

It goes without saying, the toilet brush in your bathroom is one of the cleaning tools with the most germs and bacteria. It should be cleaned and disinfected properly to ensure a hygienic environment in your house. But how to clean the thing you use to clean the toilet?

In this simple guideline, we’re going to explain the answers step by step on how to clean a toilet brush and how often should you clean or replace the toilet brush.

Contents

3 best ways to clean a toilet brush

It is practical to clean and disinfect your toilet brush after each use. There are various cleaning solutions in the market and guidelines that could easily do the job. In the following, we’re going to lay out 3 of the most effective ones.

1. Clean the Toilet Brush Using a Disinfectant Spray

Disinfectant sprays are common in household cleaning and they are effective at cleaning toilet brushes as well.

You will need:

A good disinfectant spray (Lysol, Clorox, Rubbing alcohol, etc.)
Disposable gloves
Hot water
Paper towel

Step 1: First of all, remember to wear disposable hand gloves before cleaning the toilet brush. When you are ready, gently spray the disinfectant over the brush. Rotate the thing as you spray to get all the angles and bristles covered. It is essential that the whole brush is soaked with the poison for the cleaner to successfully work.

Step 2: Once you’re done spraying, place the brush under a toilet seat by its handle and leave it for about 10 minutes. It should be enough time for the disinfectant to work and drip the excess liquid with germs into the toilet.

Step 3: Afterwards, take the brush and run it thoroughly under hot water (should be really hot). It will take off the remaining disinfectants and bacteria. Keep at it until the brush is completely clean, then let it air dry.

Step 4: To clean the handle and brush holder, follow the same procedure, and spray them with the disinfectant. Wash with hot water after a few minutes and let it sit on a paper towel to air dry.

Note: Do not restore the brush inside the holder until both of them are completely dry.

2. Clean Toilet Brush with Bleach

For a stronger solution and thorough cleaning, you can use bleach. Bleach is a potent disinfectant and one of the most powerful germ-killers.

Gather a few things first

Disposable gloves
Bleach
Hot water
Bucket

Step 1: Before you can handle bleach, make sure to be careful and wear gloves. Bleach is a toxic substance; it can damage human skin and even cause health hazards upon inhalation. Once you’re ready, make a cleaning agent by mixing 2 cups of bleach with a gallon of hot water into a bucket. The bucket should be deep enough for the toilet brush and handler to submerge fully.

Step 2: Put the toilet brush into the bucket and drown it as far as the handle. Leave it around 1-2 hours for the bleach to work.

Step 3: Once the disinfecting is done, take the brush and rinse with the hottest water you have. It will clean the remaining bleach ingredient along with any excess germs. Let the brush air dry completely before putting it back.

Don’t miss our tips: How to store the toilet brush and plunger

3. Clean it with Vinegar

Vinegar is a natural substance and an all-rounder cleaning agent, including the toilet brush. Compared to bleach, it is safer and a mild solution.

You will need:

Disposable gloves
Vinegar
Water
Bucket

Step 1: Create an easy cleaning solution by combining half part of vinegar with half of the water in a bucket deep enough to clean the toilet brush and handler whole. Soak the brush into the bucket completely and leave it for a few hours. You can add the holder in there as well.

Step 2: After the disinfecting process, take the brush and the holder to rinse them with hot water. Wash them thoroughly to make sure there are no excess ingredients left. Before restoring them, remember to air dry completely.

Frequently Asked Questions (FAQ)

How Often Should You Clean Your Toilet Brush?

According to expert suggestions, it is essential to practice cleaning a toilet brush at least once a week. Alongside this, you should clean the brush after each use to make sure you don’t leave the germs or residue a chance.

How Often to Replace Toilet Brush?

Depending on the usage rate, you should replace the toilet brush every six months, more or less. It depends on the brush’s life, its bristles’ appearance, and other factors. You can extend the brush life through routine cleaning and disinfecting after each use.

Final Words

Toilet brush does obvious cleaning jobs that expose itself to harboring bacteria and residue. Practice regular maintenance following our guidelines and keep your home safe.

As an Amazon Associate I earn from qualifying purchases.

SaveSavedRemoved 1